The Effects of Pulse Waveforms and Additive on the Properties of NanoComposite PEO Coatings

Publish Year: 1395
نوع سند: مقاله ژورنالی
زبان: English
View: 89

This Paper With 14 Page And PDF Format Ready To Download

  • Certificate
  • من نویسنده این مقاله هستم

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این Paper:

شناسه ملی سند علمی:

JR_ICAC-7-23_005

تاریخ نمایه سازی: 5 آذر 1402

Abstract:

Plasma electrolytic oxidation was employed for producing alumina, alumina/titania composite and alumina/ titania composite coatings containing sodium tungstate additive. These coatings were produced in a silicatebased electrolyte on ۷۰۷۵ aluminum alloy using unipolar and bipolar waveforms with anodic/cathodic duty aspect ratios of ۱ and ۰.۵. The results showed that the morphology of the coatings surfaces depends on the used waveform. By increasing the cathodic duty cycle, pancake-like morphology was converted to crater-like one. The incorporation of TiO۲ nano-particles into the coatings, led to the widening the micro-pores when unipolar waveforms were used. The results revealed that the incorporation of TiO۲ nano-particles doesn’t depend on the used waveforms. Titania nano-particles were incorporated into the coatings via a physical entrapping mechanism, while the adsorption mechanism of tungstate ions was electrophoretic. The corrosion resistance of the coatings was increased by increasing the cathodic duty cycle. Furthermore, the use of titania nanoparticles led to a reduction of corrosion resistance and the use of tungstate additive in bipolar waveform compensated the reduced resistance. The corrosion currents recorded ۳, ۵ and ۳ nano-amperes for simple, composite and additive contained composite coatings respectively.