S.R Das
R.P. Nayak
D. Dhupal
A. Kumar

The current experimental study is to investigate the effects of process parameters (cutting speed, feed rate and depth of cut) on performance characteristics (surface roughness, machining force and flank wear) in hard turning of AISI ۴۳۴۰ steel with multilayer CVD (TiN/TiCN/Al۲O۳) coated carbide insert. Combined effects of cutting parameter (v, f, d) on performance outputs (Ra, Fm and VB) are explored employing the analysis of variance (ANOVA). An L۹ Taguchi standard design of experiments procedure was used to develop the regression models for machining responses, within the range of parameters selected. Results show that, feed rate has statistical significance on surface roughness and the machining force is influenced principally by the feed rate and depth of cut whereas , cutting speed is the most significant factor for flank wear followed by cutting speed. The desirability function approach has been used for multi-response optimization. Based on the surface roughness, machining force and flank wear, optimized machining conditions were observed in the region ۱۴۷ m/min cutting speed and ۰.۱۰ mm/rev feed rate and ۰.۶ mm depth of cut.

Hard turning, AISI ۴۳۴۰ steel, Surface roughness, Machining force, Flank wear, ANOVA