An investigation on dynamic stability of chatter vibration in cylindrical traverse grinding operation

Publish Year: 1391
نوع سند: مقاله کنفرانسی
زبان: English
View: 1,676

This Paper With 8 Page And PDF Format Ready To Download

  • Certificate
  • من نویسنده این مقاله هستم

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این Paper:

شناسه ملی سند علمی:

ISAV02_098

تاریخ نمایه سازی: 26 اسفند 1391

Abstract:

Chatter is a result of self-excited vibration in machine tools, in which leads to dimensional errors, poor quality of surface finish in the work piece as well as possible damage to the machine tool. It is arising from the machine tool instability. Machining system instability depends on both structural and cutting process parameters. This article focuses on the use of a dynamic structural model in the stability analysis of cylindrical traverse grinding operation. For this purpose the dynamic of cylindrical grinding operation has been modeled and the natural frequencies and consequently its stability lobes were derived. Furthermore for esti-mation of the natural frequencies and mode shapes of the structure a three dimensional mod-el of the cylindrical grinding machine is developed in CATIA environment and imported to ANSYS software for the FEM modal analysis. Experimental modal testing of a cylindrical grinding machine has also been performed to obtain the mode shapes and modal frequencies of the grinding machine structure. Frequency Response Functions and subsequent extraction of modal data was performed using ME’scope modal analysis software. The results obtained by the theoretical modeling of vibration and FEM modeling, are further verified through ex-perimental modal test which were found to comply with the experimental results. Finally on-line experimental testing on structure verified the validity of stability lobe that obtained with use of dynamic model of structure and response frequency of modal testing through a program in MATLAB software.

Authors

Mehran Mahboubkhah

Faculty of Mechanical Engineering, University of Tabriz, Bahman ۲۹th Blvd Tabriz

مراجع و منابع این Paper:

لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :
  • J. Tlusty, M. Polacek, "The stability of the machine tool ...
  • M. Lee, J. Bae, K. Yoon, F. Harashima, "Real time ...
  • J. Fu, C. Troy, K. Mori, :Chatter classification by entropy ...
  • E. Keskinen, S. Launis, J.-M. Kivinen, "Simulation of chatter dynamics ...
  • ZH. Liu, G. Payre, "Stability analysis of doubly regenerative cylindrical ...
  • I. lnasaki, B. Karpu schewski, H.-S. Lee, "Grinding Chatter - ...
  • S.J. Drew, M.A. Mannan, K.L. Ong, B.J. Stone, _ measuremet ...
  • S.A. Tobias, "machine tool vibration", Londonn, Blackie, Glagow, 1965. ...
  • نمایش کامل مراجع