Hassan Mahmoudi sharabiani - Master's student in the field of environmental engineering (water and wastewater), Faculty of NaturalResources and Environment, Islamic Azad University, Research Sciences Branch, Tehran
Mehran Khalesi - PhD student in the field of environmental engineering (water and wastewater), Faculty of Natural Resourcesand Environment, Islamic Azad University, Research Sciences Branch, Tehran
Zeynab Moradi - Master of Fundamental particle physics Shahroud University of Technology, Shahroud, Iran
Marjan Vahedi - Master's Degree in Environmental Engineering (Water Resources), Faculty of Natural Resources andEnvironment, Islamic Azad University, Research Sciences Branch, Tehran

Brewery wastewater is one of the most polluted industrial wastewaters in the world. In this study, theeffect of pH and retention time on the removal of TSS, BOD and COD from brewery wastewater byelectrocoagulation with iron and aluminum electrodes in acidic and alkaline conditions has beeninvestigated. For this purpose, experiments have been performed with controlled initial pH values inthe range of ۴-۱۰ and retention time of ۱۵-۴۵ minutes. The process was a batch that was performedwith ۱۰۰۰ mL of wastewater in EC cell. The electrodes is used up in the EC process with a dimensionof ۵.۳ × ۱۰ × ۰.۱ cm, respectively. Also, three types of Fe-Fe, Fe-Al and Al-Al electrodes were used inthe laboratory. The results showed that the optimal removal efficiency took place at a retention time of۴۵ minutes and a pH of ۴.۳.The amount of TSS, BOD, and COD decreased from ۲۵۴۰, ۲۸۷۰, and۱۲۴۰۰ mg/L to ۵۲۶, ۶۰۸, and ۲۶۶۶ mg/L, respectively, which had ۷۹.۳, ۷۸.۵, and ۷۸.۸% efficiency,respectively. The highest efficiency was observed in Al-Al electrodes. COD removal efficiency of۸۲.۶%, BOD ۸۰.۵% and TSS ۸۱.۱% were observed in these electrodes. PH changes and choosing theright electrode for industrial wastewater treatment are very important.

brewery wastewater, electrocoagulation, pH impact, retention time