Improvement Uniformity of Coating Thickness for Hot-Dip Galvanized Steel Strips

Publish Year: 1390
نوع سند: مقاله کنفرانسی
زبان: English
View: 1,242

This Paper With 8 Page And PDF Format Ready To Download

  • Certificate
  • من نویسنده این مقاله هستم

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این Paper:

شناسه ملی سند علمی:

ICME12_393

تاریخ نمایه سازی: 25 شهریور 1392

Abstract:

In present research work, effects of some production parameters such as zinc bath temperature and air knife height on uniformity and structure of hot-dip galvanized coating produced in Mobarakeh Steel Company was studied. The thickness of intermetallic layers was determined by Optical Microscopy. In order to check the thickness of coating and alloying elements distribution through the coating thickness, X-Ray Mapping and GDOES analysis were employed. In order to investigate the uniformity of coating thickness, zinc coating firstly removed and its mass was measured, and then the coating thickness diagrams were plotted. Results showed that by increasing zinc bath temperature the fluidity of the molten zinc increased and the coating uniformity improved. Also, in lower speeds, by increasing the air knife height, when the strip passed through the air knife, coating temperature decreased and caused increasing in the coating liquid viscosity obviously. Thus the thickness of coating increased and reduction of coating uniformity happened. In higher speeds, by decreasing the air knife height, direct air collision to the surface of molten bath occurs resulting in coating uniformity decrease. Therefore in order to increase the coating uniformity, the height of air knife should be optimized.

Authors

S. Shahzamani

Department of Materials Engineering, Isfahan University of Technology, Isfahan

M. Meratian

Department of Materials Engineering, Isfahan University of Technology, Isfahan

M.R. Toroghinejad

Department of Materials Engineering, Isfahan University of Technology, Isfahan

مراجع و منابع این Paper:

لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :
  • zei L. _ gg/abu- _ aniا [4] _ _ galvani ...
  • اح. عسگری، م. طرقی نژاد، م .گلعذار، "عوامل موثر بر ...
  • A.R. Marder, _ metallurgy of zinc coated steel", Progress in ...
  • http :/galvinfo. com/ ginote s/GalvInfoNoe 3 1.pdf _ "How Zinc ...
  • y. DeAbreu, A. DaSilva, A. Ruiz, R. Requiz and N. ...
  • E. Mcdevitt, Y. Morimoto and M. Meshii, _، Characteri zation ...
  • http :/galvinfo. com/ ginote s/GalvInfoNoe 2 4.pdf ;'The Role of ...
  • Y. Morimoto, E. Mcdevitt and M. Meshii, _، Characteri zation ...
  • http :/www. galvanizeit. org/i mage s/uploads/pub lic Dip Galvanizing _ ...
  • vs.Continuous Sheet Galvanizing", American Galvanizers Association, 2010. ...
  • http :/www. ckit _ co. za/ se cure/ conve yor/troughed/c ...
  • http ://www. galvanizing. _ uk/index .php?cms id =291, "process and ...
  • St. Christopher Road, St. Andrews, "Practical Guidelines for the Inspection ...
  • N. C. Jain, "Defects in Continuous Hot Dip Galvanized Steel ...
  • Materials Uniformity Project Team, "A Report On Uniformity Of Coating ...
  • _ _ _ Weight [Mass] for Continuos Hot-Dip Galvanized Sheet ...
  • B. Zhang., "Development of Corrosion Resistant Galvanising Alloys", A thesis ...
  • نمایش کامل مراجع