m jafari - Department of Mechanical Engineering, Babol University of Technology, Postal Code: ۴۸۴, Babol, Iran
m farhdi - Department of Mechanical Engineering, Babol University of Technology, Postal Code: ۴۸۴, Babol, Iran
k sedighi - Department of Mechanical Engineering, Babol University of Technology, Postal Code: ۴۸۴, Babol, Iran
e fattahi - Department of Mechanical Engineering, Babol University of Technology, Postal Code: ۴۸۴, Babol, Iran

In the present study, the effects of wavy wall’s properties on mixed convection heat transfer of Water-Al2O3 Nanofluid in a lid-driven cavity are investigated using the Lattice Boltzmann Method(LBM). The Boundary Fitting Method with second order accuracy at both velocity and temperaturefields is used to simulate the curved boundaries in the LBM. The problem is investigated for differentRichardson numbers ( 0.1  Ri  10 ), volume fractions of nanoparticles ( 0.01   0.05 ), curveamplitudes ( 0.05  A  0.25 ) and phase shifts of corrugated wall ( 0    270 ) when the Reynoldsnumber is equal to 25. The results represent the effective role of corrugated wavy wall on the rate of nanofluid heat transfer. It is observed that increasing the wavy wall’s amplitude leads to a decrease in the average Nusselt number in high Richardson number. It is found that increasing the volume fraction ofnanoparticles enhances the rate of heat transfer. Results also show that adding nanoparticles to the base fluid has significant effects on both fluid flow and temperature field of the mixed convection, especially for low Richardson number

Lattice Boltzmann method; Boundary fitting method; Wavy surface; Nanofluid;Mixed convection; Richardson number