ورود
مقالات فارسیISIکنفرانسهاژورنالها

DYNAMIC SIMULATION OF A HIGH PRESSURE REGULATOR

Publish place: Journal of Computational and Applied Research in Mechanial Engineering، Vol: 1، Issue: 1
Publish Year: 1391
نوع سند: مقاله ژورنالی
زبان: English
View: 933

This Paper With 12 Page And PDF Format Ready To Download

  • Certificate
  • من نویسنده این مقاله هستم

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این Paper:
https://civilica.com/doc/255121

شناسه ملی سند علمی:

JR_JCARME-1-1_002

تاریخ نمایه سازی: 17 خرداد 1393

Abstract:

In this paper, the dynamic simulation for a high pressure regulator is performed to obtain the regulator behavior.To analyze the regulator performance, the equation of motion for inner parts, the continuity equation for diversechambers and the equation for mass flow rate were derived. Because of nonlinearity and coupling, these equations are solved using numerical methods and the results are presented. Additionally, the dynamic analysis results consist of the output pressure change versus time, the displacement of the moving parts versus time, the regulator mass flow rate versus time and the output pressure versus mass flow rate in different controlling spring pre-loads. Furthermore, the sensitivity analysis is carried out and the main parameters affecting the regulator performance are identified. Finally, the results of the dynamic simulation are validated by comparing them with the experimental results.

Keywords:

High pressure regulator , Dynamic analysis , Non-linear analysis , Numerical method

Authors

a.r shahani

Department of Applied Mechanics, Faculty of Mechanical Engineering, K. N. Toosi University of Technology, Pardis Street, Mollasadra Avenue, Vanak Square, P.O. Box ۱۹۳۹۵-۱۹۹۹, Tehran, Iran

h esmaili

Department of Applied Mechanics, Faculty of Mechanical Engineering, K. N. Toosi University of Technology, Pardis Street, Mollasadra Avenue, Vanak Square, P.O. Box ۱۹۳۹۵-۱۹۹۹, Tehran, Iran

a Aryaei

Department of Applied Mechanics, Faculty of Mechanical Engineering, K. N. Toosi University of Technology, Pardis Street, Mollasadra Avenue, Vanak Square, P.O. Box ۱۹۳۹۵-۱۹۹۹, Tehran, Iran

s Mohammadi

Department of Applied Mechanics, Faculty of Mechanical Engineering, K. N. Toosi University of Technology, Pardis Street, Mollasadra Avenue, Vanak Square, P.O. Box ۱۹۳۹۵-۱۹۹۹, Tehran, Iran