Abdolhossein Fereidoon - Faculty of Mechanical Engineering, Semnan University, Semnan, Iran
Kamal Kolasangiani - Department of Mechanical Engineering, Shahrood University of Technology, Shahrood, Iran
Amin Akbarpour - Department of Mechanical Engineering, Semnan Branch, Islamic Azad University, Semnan, Iran
Mahmoud Shariati - Department of Mechanical Engineering, Ferdowsi University of Mashhad, Mashhad, Iran

In this paper, simulation and analysis of thin steel cylindrical shells with elliptical cutouts under oblique loading were studied using finite elementmethod. First, the numerical results were validated by the results ofexperimental test performed by an INSTRON 8802 servo hydraulic machine. Also, the effect of cutout angle (θ), cutout size, cutout position (L0/L) and cutout aspect ratios (b/a) were investigated, where parameter (a) shows sizeof the cutout along longitudinal axis of the cylinder, parameter (b) is size of the cutout in circumferential direction of the cylinder on the buckling andpost-buckling behavior of cylindrical shells with finite element method. It can be concluded that increasing width of the cutout extremely decreased thebuckling load while the cutout height was constant. Moreover, changing position of the cutout from the mid-height of the shell toward the edges increased the buckling load.

buckling,cutout, combined loading