Morteza H Sadeghi - Professor
P Jalili - Graduate Student
S Varahram - Graduate Student
H Saber - Graduate Student, Vibration and Modal Analysis Research Lab, Faculty of Mechanical engineering, University of Tabriz, Tabriz, ۵۱۶۶۶-۱۴۷۶۶, Iran

Modal testing has found extensive use in identifying dynamic properties of a system. This method is based upon excitation-response (input-output) measurements. However, there are several cases in which the system, if not impossible, is very hard to be excited physically, or the excitation signals may not be measured. As a result, recently a method has been developed which is based only on output measurements, called Operational Modal Analysis or Output-only Modal Analysis (OMA).In this paper, at the first step, a finite element of a simple structure (simply supported beam) is modelled and modal parameters were obtained. At the second step, the laboratory scale of the system was excitated by three different types of excitations; namely by shaker, sound and enviromental noise. Then, the modal parameters were obtained by OMA method. For obtaining the modal parameters of the structure by OMA method, we utilize frequency domain decomposition (FDD) technique. Finally, the obtained results of these three types of excitation are compared with those obtained by numerical method.

Vibration, Operational Modal Analysis, Finite Element, Frequency Domain Decomposition