Saadeghian - B.S. of Mechanical Engineering Saman Sanat Fanavar, Engineering Design & Consultation Ltd Co.
Shameli - M.S. of Mechanical Engineering Engineering Research Center of Agricultural Jahad Iran, East Azarbaijan, Tabriz

The purpose of the present investigation, which is done for the first time in Iran, is design of spacers made of composite materials for compact transmission lines. Design has been based on imposed forces including the wind aerodynamic force, gravitational force of conductors and effects of ice and snow upon the conductors. First, using the potential flow analysis of fluid mechanics, the wind force has been described and applying the weight of the conductor together with ice and snow has been calculated. Then considering the resultant force, stability and post-buckling of spacer has been discussed and appropriate diameter has been selected. Design ends with choosing of composite materials as constructing material. The spacer has been analyzed and optimized for prevention of mechanical failures and finally the blowing spacing has been obtained. For GFRP composite (Epoxy Resin) solid rods with Vf = 0.6 for nominal diameter D = 40 & 54 mm, length L = 2 & 4 m have been resulted, respectively. For GFRP composite (Epoxy resin) hollow rods with Vf = 0.6, for Di = 40 & 54 mm, thicknesses of e = 7 & 5.2 mm calculated, respectively.

spacer, compact transmission line, composite, buckling, Design