LIMIT LOAD ANALYSIS OF COMPONENTS WITH MULTIPLE CRACKS
Publish place: 13th Annual Conference of Mechanical Engineering
Publish Year: 1384
نوع سند: مقاله کنفرانسی
زبان: English
View: 1,853
This Paper With 6 Page And PDF Format Ready To Download
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ISME13_661
تاریخ نمایه سازی: 21 اسفند 1385
Abstract:
Elastic modulus adjustment procedures (EMAP) have been employed to determine limit loads fracture mechanic components including cracks. On the basis of linear elastic Finite Element Analysis (FEA) with non-hardening elastic properties, i.e., by specifying spatial variations in the
elastic modulus, numerous set of statically admissible and kinematically admissible distributions can be generated, and both lower and upper bounds on limit loads can be obtained. This paper demonstrates the application of EMAP in the context of limit load determination of cracked
components. The procedure is initially applied to some practical components with cracks to verify their effectiveness in analyzing crack geometries. The analysis is then directed to pipe geometries containing multiple cracks representing typical stress corrosion colonies. The limit load results are then compared to traditional nonlinear finite element analysis results or analytical solutions.
Keywords:
EMAP – Multiple cracks – FEA- Lower bound - Upper bound
Authors
مراجع و منابع این Paper:
لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :