Adsorption of dibenzothiophene by copper- and copper oxideimpregnated activated carbon fibers
Publish place: 07th International Congress on Chemical Engineering
Publish Year: 1390
نوع سند: مقاله کنفرانسی
زبان: English
View: 953
This Paper With 8 Page And PDF Format Ready To Download
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ICHEC07_054
تاریخ نمایه سازی: 25 فروردین 1394
Abstract:
Three types of copper-impregnated activated carbon fibers (ACF) were prepared by impregnation of a commercial ACF with Cu(NO3)2.3H2O using an incipeint wetness method followed bycalcination at 325, 375, or 595 oC under a nitrogen atmosphere. Samples prepared at different temperatures contained Cu, CuO, or Cu2O species. The total copper content and the crystalline structure of loaded copper species were determined by atomic absorption spectroscopy and X-raydiffraction, respectively. Adsorption isotherms of dibenzothiophene (DBT) from a simulatedsimple fuel (DBT dissolved in n-hexane) by original and copper-loaded fibers were measured at room temperature. Cu2O-loaded ACF showed a significantly higher DBT uptake compared to ACF samples loaded with Cu and CuO and the ACF sorbent. Enhanced adsorption of DBT by Cu2O-loaded ACF was expalained based on the hard/soft acid and base theory.
Keywords:
Authors
Elham Sadat Moosavi
Chemical Engineering Department, Tarbiat Modares University
Ramin Karimzadeh
Chemical Engineering Department, Tarbiat Modares University
S.A Dastgheib
Institute of Natural Resource Sustainability, University of Illinois at Urbana-Champaign
مراجع و منابع این Paper:
لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :