Synthesis of Conductive Polymer Nanocomposites Using Methanol as Solution
عنوان مقاله: Synthesis of Conductive Polymer Nanocomposites Using Methanol as Solution
شناسه ملی مقاله: ICHEC07_451
منتشر شده در هفتمین کنگره ملی مهندسی شیمی در سال 1390
شناسه ملی مقاله: ICHEC07_451
منتشر شده در هفتمین کنگره ملی مهندسی شیمی در سال 1390
مشخصات نویسندگان مقاله:
Mohsen Ghorbani - PhD student of Babol University of Technology, P.O.Box ۴۸۴, Babol, Iran
Mohammad Soleimani Lashkenari - PhD student of Babol University of Technology, P.O.Box ۴۸۴, Babol, Iran
Hossein Eisazadeh - Prof in chemical engineering department of Babol University of Technology, P.O.Box ۴۸۴, Babol, Iran
خلاصه مقاله:
Mohsen Ghorbani - PhD student of Babol University of Technology, P.O.Box ۴۸۴, Babol, Iran
Mohammad Soleimani Lashkenari - PhD student of Babol University of Technology, P.O.Box ۴۸۴, Babol, Iran
Hossein Eisazadeh - Prof in chemical engineering department of Babol University of Technology, P.O.Box ۴۸۴, Babol, Iran
Nanocomposite particles of Polypyrrole/Poly(vinylacetate) (PPy/PVAc) was successfully synthesized in water/methanol solution by polymerization of pyrrole and vinylacetate by using ferric chloride and ammonium persulfate as an oxidant. These nanocomposites were subsequentlycharacterized such as morphology, chemical structure and electrical properties by using scanning electron microscopy (SEM), fourier-transform infrared spectroscopy (FTIR) and four point probe method, respectively. The results indicated that PPy/PVAc nanocomposite can be prepared usingferric chloride and ammonium persulfate as an oxidant in water/methanol solution at room temperature
کلمات کلیدی: Nanocomposite, Polypyrrole, Methanol, Chemical structure, Conductivity
صفحه اختصاصی مقاله و دریافت فایل کامل: https://civilica.com/doc/341202/