Development of olive mill wastewater treatment by novel functionalized carbon nanotube/polyethersulfone ultrafiltration membrane

Publish Year: 1390
نوع سند: مقاله کنفرانسی
زبان: English
View: 871

This Paper With 9 Page And PDF Format Ready To Download

  • Certificate
  • من نویسنده این مقاله هستم

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این Paper:

شناسه ملی سند علمی:

ICHEC07_516

تاریخ نمایه سازی: 25 فروردین 1394

Abstract:

Olive oil mill wastewater (OMW) is known as the highest organic loads of concentrated effluents,especially with high organic chemical oxygen demand (COD). Membrane processes for wastewater treatment have several advantages, which their use is strongly justifiable. However, One common problem of membrane filtration is fouling that strongly affect on membrane performance and selectivity. In order to overcome these problems different pretreatmentswere used. In this work the novel UF membranes with different concentration of Functionalized Multi Wall Carbon Nano Tube (F-MWCNT) were used for OMW treatment due to attain high COD removal. Theeffects of operatinon parameters including pressure and temperature have been investigated on the UF system flux permeation and COD removal. The Taguchi method was applied to design of experiment and optimization. Under the optimum operation conditions suggested by Taguchi, flux and COD removal of UF filtration were obtained 18.1 (kg/m2 hr) and 40.6%, respectively, which were conformed with the predicted results by Taguchi (17.3 kg/m2 hr and 39.9% for flux and COD removal, respectively). The observed results show that the most important parameter is membrane type which the using CNT in the matrix of PES UF membranes was improved COD removal considarably

Authors

alireza zirehpour

Nanotechnology Research Institute, Faculty of chemical engineering, Babol University of Technology, Babol, Iran

mohsen jahanshahi

Nanotechnology Research Institute, Faculty of chemical engineering, Babol University of Technology, Babol, Iran

ahmad rahimpour

Nanotechnology Research Institute, Faculty of chemical engineering, Babol University of Technology, Babol, Iran

majid peyravi

Nanotechnology Research Institute, Faculty of chemical engineering, Babol University of Technology, Babol, Iran

مراجع و منابع این Paper:

لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :
  • K. Kestiog Flu, , T. Yonar, N. Azbar, Feasibility of ...
  • R. Sarika, N. Kalogerakis, D. Mantzavinos, Treatment of olive mill ...
  • A. Ginos, T. Manios, D. Mantzavinos, Treatment of olive mill ...
  • E.S. Aktas, S. Imre, L. Ersoy, C haracterization and lime ...
  • N. Azbar, A. Bayram, A. Filibeli, A. Muezzinoglu, F. Sengul, ...
  • A. Giannis, M. Kalaitzakis, E. D iamadopoulos, Electrochemic al treatment ...
  • H. Inan, A. Dimoglo, H. Simsek, M. Karpuzcu, Olive oil ...
  • S. Khoufi, F. Feki, S. Sayadi, Detoxification of olive mill ...
  • U. Tezcan-Un, S. Ugur, A.S. Koparal, U.B. Ogutveren, Electroc oagulation ...
  • B.K Mert, T. Yonar, M.Y. Kilic, K. Kestioglu, Pre-treatmet studies ...
  • S. Khoufi, F. Aloui, S. Sayadi, Treatment of olive oil ...
  • F.A. El-Gohary, M.I. Badawy, M.A. El-Khateeb, A.S. El-Kalliny, Integrated treatment ...
  • T. Coskun, E. Debik, N.M. Demir, Treatment of oilve mill ...
  • S.H. Park, Robust design and Analysis for Quality Engineering, Chapman ...
  • M.S. Phadke, Quality Engineering Using Robust Design, Prentice-Hall, USA, 1989. ...
  • _ _ Engineering Congress & Exihibition Kish, Iran, 21-24 November, ...
  • نمایش کامل مراجع