mohsen zirrahi
reza azin - Department of Chemical Engineering, School of Engineering, Persian Gulf University, Bushehr ۷۵۱۶۹۱۳۷۱۸, Iran Department of Technology and Innovation, Persian Gulf Science and Technology Park, Bushehr ۷۵۱۵۷۹۷۴۱۴, Iran
reza Malakooti

Many carbon capture and storage (CCS) and Acid Gas Injection (AGI) projects involve streams of impure CO2 mixtures produced from power plants and gas processing units. A key parameter in the design of acid gas inje tion and miscible CO2 flooding is estimation of Minimum Miscibility Pressure (MMP) of impure CO2-oil. In this study, a correction factor based on Alston et al. model was modified to obtain the MMP of impure CO2/oil system. The correction factor that depends on weight average pseudo critical temperature of injected gas was multiplied by calculated MMP of pure CO2 to predict MMP of flue gas and acid gas-oil. Weight average pseudo critical temperature of injected gas was adjusted by using a multiplying factor (MFi) for each component in the gas mixture. To confirm the accuracy of improved model Absolute Average Deviation (AAD) was computed. Results showed that MMP experimental statistics of impure CO2-oil can be reproduced with AAD less than 5.46% through this model which represented the evaluation of more accurate MMP data compare to those obtained by other available correlations

Miscibility, Minimum Miscibility Pressure, Carbon Capture and Sequestration, correlation