TECHNICAL EVALUATION METHODS CRITERIA FOR SELECTING HIGH RELIABILITY SUSPENSION INSULATORS FOR TRANSMISSION LINES

Publish Year: 1371
نوع سند: مقاله کنفرانسی
زبان: English
View: 1,760

This Paper With 10 Page And PDF Format Ready To Download

  • Certificate
  • من نویسنده این مقاله هستم

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این Paper:

شناسه ملی سند علمی:

PSC07_029

تاریخ نمایه سازی: 14 شهریور 1386

Abstract:

Reliability of power transmission lines depends on long-term performance of the suspension insulators used on the lines. The importance of such long-term performance of the insulators has been recently noted, and thus various causes of insulator deterioration are verified and laboratory test method for evaluating the long-term performance of insulators are studied. The evaluation methods explained here include thermal-mechanical performance test, steep front impulse flashover test, power arc test, salt fog aging cycle test, autoclave test. From the test results, it can be said that the abovementioned evaluation methods are effective to select high reliability suspension insulators.

Authors

Imakoma

NGK INSULATORS, LTD. Nagoya, Mizuho, Japan

Suzuki

NGK INSULATORS, LTD. Nagoya, Mizuho, Japan

Fujii

NGK INSULATORS, LTD. Nagoya, Mizuho, Japan

Nakachi

NGK INSULATORS, LTD. Nagoya, Mizuho, Japan

مراجع و منابع این Paper:

لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :
  • (1) E.A. Cherney, "Cement Growth Failure of Porcelain Suspension Insulators", ...
  • (2) D.Lecomte and P. Merer "Evolution of the Design for ...
  • The rm al -mechanical performance test ...
  • Steep front impulse flashover test 3) Power arc test ...
  • Salt fog aging cycle test 5) Autoclave test ...
  • (3) A.L. Barclay and D.A. Swift, "Cap and Pin Insulators ...
  • (4) K.Callaghan, B.Pokarier and B.McMlahon, "Insulator Performance in the Queensland ...
  • (5) J.S.T. Looms, "Insulators for High Voltages", IEEE Power Engineering ...
  • (7) R.E. Macey, "The Performance of High Voltage, Outdoor Insulation ...
  • (8) J.H.Mason, et al., "DC Salt-Fog Tests on Glass and ...
  • th International Conference On Dielectric Material, Mesurement and Applications, pp.139-142, ...
  • (9)IEC Pub . 383-1983, "Tests on Insulators of Ceramic Material ...
  • (10)ANSI C29.2-1983, "American National Standard for Insulators: Wet-Process Porcelain and ...
  • (11)IEC Pub. 575-1977, _ h erm al-Mechan ical Performance Test ...
  • (12)SEN 24 06 10'-1976, "Insulators. The rmo-Mechan ical Performance Test ...
  • (13)J.J. Taylor et al., "Insulator Design and Application as Influenced ...
  • (14) D.G. Kolker, "The Effect of-Steep- Front Lightning Discharges On ...
  • (16)IEC Draft Report, SC36B(S)1 11, Puncture Testing of Insulators of ...
  • (17)K. Naito, T. Irie and T. lchioka, "Protection of Power ...
  • (18)C. A. 0. Peixoto et. al., "Failure of Transmission Line ...
  • (19)ASTM C151 -77(Reapproved 1983), "Standard Test Method for Autoclave Expansion ...
  • نمایش کامل مراجع