Shear Strength Parameters of Sand-Reinforced with Waste Tire Shreds

Publish Year: 1380
نوع سند: مقاله کنفرانسی
زبان: English
View: 3,065

This Paper With 10 Page And PDF Format Ready To Download

  • Certificate
  • من نویسنده این مقاله هستم

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این Paper:

شناسه ملی سند علمی:

GIC01_32

تاریخ نمایه سازی: 12 آذر 1384

Abstract:

With the development of societies and increasing vehicles, numerous waste tires are discarded annually and enter environment. On the other hand, the ground soil is to be reinforced in some geotechnical projects. This paper presents the influence of tire shred contents, compaction, and size variations of waste tire shreds on shear strength parameters of sand-tire shred mixtures. The results obtained from performing large direct shear tests on sand-shred specimens show that the friction angle of the mixtures increase significantly with increasing shred contents and compaction energy. It has been also investigated that optimizing the shred dimensions can increase the friction angle of the mixtures in the range of 13% to 63% compared with the friction angle of the sand alone. With the selected widths of rectangular shreds, compaction efforts, shred contents, and the variations of aspect ratios, it is possible to increase the friction angle 1 up to 113,5%, that is 1= 67o. It has been investigated that for a given width of tire rectangular shreds, there is solely a certain length, which gives the greatest 1. This is the main contribution of this paper in the subject.

Authors

Mahmoud Ghazavi

Assistant Professor, Civil Engineering Department, Isfahan University of Technology

Masoud Amel Sakhi

Graduate Student, Civil Engineering Department, Isfahan University of Technology

مراجع و منابع این Paper:

لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :
  • Ahmed, I., and Lovell, C. (1993).، :Use of Rrubber Tires ...
  • Allman, M. A., and Simundic, G. (1998). *Testing of a ...
  • Benson, H., and Khire V. (1994). *Reinforcing Sand with Strips ...
  • Bosscher, J., Edill, T. B., and Kuraoke, S. (1997). *Design ...
  • Edil, T. B., and Bosscher, P. J. (1994). *Engineering Properties ...
  • Eldin, N. N., and Senouci, A. B. (1993).، Rubber-Tire Particles ...
  • Foose, J., Benson, H., and Bosscher, J. (1996). _ Reinforced ...
  • Garga, V. K., and O' Shaughnessy, V. (2000a).، ،T i ...
  • Garga, V. K., and O 'Shaughnessy, V. (2000b).، ، T ...
  • Hall, T. (1991).، Reuse of Shredded Tire Material for Leachate ...
  • Heimdahl, C., and Druscher, A. (1999).، Elastic Anisotropy of Tire ...
  • Humphrey, D.N., and Manion, W.P. (1992). *Properties of Tire Chips ...
  • Humphrey, D. N., and Nickels, W. L. (1997). «Effect of ...
  • Lee, J. H., Salgado, R., Bernal, A., and Lovell, C. ...
  • Nightingale, D. E. B., and Green, W. P. (1997).، 0An ...
  • O' Rourke, T. D., Druschel, S. J., and Netravali, A. ...
  • Poh, P. S. H., and Broms, B. B., _ Stabilization ...
  • S umanarathna, I. H. D., _ allawarctchie, D. P., and ...
  • Tuncan, M, Cetin, A., Tuncan, A., and Koyuncu, _ (1998).، ...
  • Tweedie J.J, Humphrey, D.N., and Sanford, T.C. (1998).، .Tire-Shreds as ...
  • Wu, W. Y., Benda, C. C., and Cauley, R. F. ...
  • نمایش کامل مراجع