Voltage and reactive power control in a distribution system using hybrid SA-DBPSO algorithm

Publish Year: 1394
نوع سند: مقاله کنفرانسی
زبان: English
View: 751

This Paper With 7 Page And PDF Format Ready To Download

  • Certificate
  • من نویسنده این مقاله هستم

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این Paper:

شناسه ملی سند علمی:

EPDC20_170

تاریخ نمایه سازی: 1 مهر 1394

Abstract:

Voltage and reactive power control in distribution systems includes the control of devices such as tap changer, shunt capacitor and feeder capacitors. The main objectives of this problem are defined as minimizing the power loss, reducing the reactive power transfer of the substation transformer and improving of the voltage profile. Control variables include the state of capacitors positions and main transformer under load tap changer position. Furthermore, by changing the capacitors locations in the network per year, the methods are improved in this paper. In order to solve the optimization problem, simulated annealing algorithm is used to replace the capacitors, and discrete binary particle swarm optimization algorithm is implemented to solve volt/var problem in any replacement. To demonstrate the effectiveness of this method, the IEEE 69 bus distribution test system, including one new shunt capacitor and ten existing feeder capacitors in some installable feeders is used.

Keywords:

Distribution system , particle swarm optimization , voltage and reactive power control

Authors

Abdolhamid Rahideh

Department of Electronics and Electrical Engineering Shiraz University of Technology, Shiraz, Iran

Mohsen Gitizadeh

Department of Electronics and Electrical Engineering Shiraz University of Technology, Shiraz, Iran

Ali Sadradeh

Research and standard office, Fars Regional Electric Company, Shiraz, Iran