Influences of Discontinuity on Lateral and AxialCompression Progress of Circular Composite Open andClosed-Sections

Publish Year: 1393
نوع سند: مقاله کنفرانسی
زبان: English
View: 502

متن کامل این Paper منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل Paper (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.

  • Certificate
  • من نویسنده این مقاله هستم

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این Paper:

شناسه ملی سند علمی:

COMPOSIT04_082

تاریخ نمایه سازی: 22 مهر 1394

Abstract:

This article studies influences of strip and circular discontinuities on energy absorption behavior of circular composite tubes under lateral and axial loadings. Composite specimens were prepared in different characteristics anddifferent discontinuities were machined into the samples and they were compressed in quasi-static condition. Some holes with different diameters were machined into tube wall and some specimens were laterally compressed and the others were tested axially. In other specimens, longitudinal strip with different widths was machined and converted them to open-sections. Then, they laterally compressed. For each specimen, diagrams of lateral load, energy absorptionand absorbed energy/mass versus displacement were sketched. Experimental results indicate that there is an optimum diameter for circular discontinuity and a composite tube with optimum circular discontinuity absorbs higher energy/mass. Also, when number of created hole into a tube enhances, absorbed energy/mass ratio of the specimen increases. Furthermore, in open-section specimens, by increasing strip width, energy absorption increases.

Authors

Seyed Ghaem Amirhosseini

Master of Science student, Mechanical Engineering Department, Yasouj University

Javad Shahidi

Master of Science student, Mechanical Engineering Department, Yasouj University

Abbas Niknejad

Assistant Professor, Mechanical Engineering Department, Yasouj University,P. O. Box: ۷۵۹۱۴-۳۵۳, Yasouj, Iran