Reverse Engineering for Designing the Coupling of a 32 MW Rotor-generator by Shrink Fitting Method

Publish Year: 1394
نوع سند: مقاله ژورنالی
زبان: English
View: 553

This Paper With 8 Page And PDF Format Ready To Download

  • Certificate
  • من نویسنده این مقاله هستم

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این Paper:

شناسه ملی سند علمی:

JR_IJE-28-9_016

تاریخ نمایه سازی: 15 آذر 1394

Abstract:

This study presents a designing process for refurbishing of a 32 MW rotor-generator damaged coupling. The reason of rotor damage was being hit by the quivers of an explosion. The original coupling was union with the rotor formed after a machining process on a mono block forged rotor. Insome areas imposed damages caused the breaking off and detachment of some parts in the couplingflange. Because of this accident, the coupling region was removed by machining completely andanother coupling was made and mounted on the rotor-generator shaft by shrink fitting. Reverseengineering method was used with comparing a 145 MW rotor-generator. At first, all of the mechanical loadings on the coupling were assessed. The calculations include analytical method using ANSI standard and simulation of ANSYS software. The results showed that in spite of geometrical restrictions, it is possible to install a distinct coupling by shrink fitting on the rotor generator shaft

Authors

e Poursaeidi

Department of Mechanical Engineering, University of Zanjan, Zanjan, Iran

m.r Mohammadi Arhani

Department of Mechanical Engineering, University of Zanjan, Zanjan, Iran