An Experimental Investigation on the Effects of some Parameters on Nanofiber Produced by Electrospinning Method
Publish place: International Journal of Mechatronics, Electrical and Computer Technology، Vol: 4، Issue: 12
Publish Year: 1393
نوع سند: مقاله ژورنالی
زبان: English
View: 520
This Paper With 10 Page And PDF Format Ready To Download
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_IJMEC-4-12_023
تاریخ نمایه سازی: 16 فروردین 1395
Abstract:
In this paper, the effect of some different parameters on size and morphology of produced nanofibers has been investigated experimentally. These parameters consist of voltage, needle diameter and collector temperature. It was observed that there is an optimum distance to voltage ratio where the fiber diameters are minimum. This ratio was 1 cm/kv. Moreover it was observed that with increasing the voltage, uniformity of produced fibers increases. This aspect of morphology was not considered in previous papers. Both the increasing the needle diameter and collector temperature resulted in generating the fibers with smaller diameters
Keywords:
Authors
Alireza Zareei
Department of Mechanical Engineering, University of Tehran, Tehran, Iran
Mahmoud Mosavi Mashhadi
Department of Mechanical Engineering, University of Tehran, Tehran, Iran
Iman Heidari
Department of Mechanical Engineering, University of Tehran, Tehran, Iran