Finite Element Analysis of Embankment utilizing Small-Scale Centrifugal Dimension

Publish Year: 1394
نوع سند: مقاله کنفرانسی
زبان: English
View: 594

This Paper With 15 Page And PDF Format Ready To Download

  • Certificate
  • من نویسنده این مقاله هستم

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این Paper:

شناسه ملی سند علمی:

CONFUCIAN01_002

تاریخ نمایه سازی: 28 اسفند 1394

Abstract:

Physical modelling through full-scale and small-scale models is widely implemented in order to define specific aspects of the prototype behaviour. On other hand, numerical modeling are essentially required to cope with the complex geotechnical problems due to the ability of considering andanalyzing all aspects of the model. It can afford more perception about the behavior of geosyntheticreinforcedembankment. In this study, four different cases of unreinforced and reinforced embankment models constructed on soft and stiff grounds are studied through physical modelling by means ofcentrifuge tests and numerical modelling by means of finite element method. As the mini-centrifuge apparatus used in this study is not fully instrumented and has some technical difficulties and limitations, only a quantitative evaluation of stability, deformation pattern and behaviour of thesescases are carried out by analysing the variation of vertical displacements and settlements in different stage of construction. A comparison between the results of finite element models and measurements of centrifuge tests is carried out to validate and identifies the reasonableness of the finite elementmethod. To have a realistic and accurate comparison between these two methods, it is rational to consider all-important effective parameters in finite element modeling of centrifuge test. Therefore, this study focuses mostly on accurate finite element modeling of small-scale centrifugal models byconsidering varying dimensions of model due to the different acceleration field of centrifuge test, sidewall friction of the soil box and small boundary condition and payload capacity of the centrifuge test. The results show the different deformation behavior for these four cases and indicate the significant effect of the geosyntheic reinforcement on increasing the stability of embankment. Thecomparison analysis presents a good agreement between results of theses two methods, which validated the finite element technique in analysis of different embankment cases.

Authors

Ali Sobhanmanesh

PhD. in Geotechnical Engineering University Teknologi Malaysia (UTM), Malaysia

Ramli Nazir

Professor of Geotechnical Engineering University Teknologi Malaysia (UTM), Malaysia

Leila Amini Jahromi

Persian Gulf University (PGU), Iran

مراجع و منابع این Paper:

لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :
  • Bergado, D. T., Long, P. V and Srinivasa Murthy, B. ...
  • Bergado, D. T. and Te erawattnasuk, C. (2008). 2D and ...
  • Bhardwaj, D. _ and Mandal, J. . (2008). Centrifuge Modeling ...
  • Brinkgreve, R. B. J. (2010). PLAIS 2D Reference Manual. The ...
  • Chen, J. F., Yu, S. B., Han, J., Shi, Z. ...
  • Chen, J.-F. and Yu, S.-B. (2011). Centrifugal and Numerical Modeling ...
  • Davies, M. (1985). CENTRIFUGE MODEL OF AN EMBA NKMENT FAILURE. ...
  • Desai, C. S. and Abel, J. F. (1972). Introduction to ...
  • Ding, J. H. and Bao, C. G. (1999). Centrifugal model ...
  • Hu, H. R., Chen, S. L. and Shen, Z. L. ...
  • Hu, Y., Zhang, G., Zhang, J.-M. and Lee, C. F. ...
  • Jiang, X., Qiu, Y. J. and Wei, Y. X. (2007). ...
  • Koerner, R. M. (2005). Designing with Geosynthetics. 5th ed. Prentice ...
  • Li, B., Yu, W., Gong, B. and Cheng, Z. (2013). ...
  • Mandal, J. (1996). Centrifuge modelling of geosynthetic reinforced embankments on ...
  • Mohamed, S. B. a., Yang, K.-H. and Hung, W.-Y. (2014). ...
  • Muhardi. (2011). Pulverised Fuel Ash As Structural Fill for Embankment ...
  • Parry, R. H. G., Almeida, M. S. S. and Davies, ...
  • Sharma, J. S. and Bolton, M. D. (1996). Centrifuge modelling ...
  • Smith, I. M. and Hobbs, R. (1974). Finite element analysis ...
  • Sommers, A. N. and Viswanadham, B. _ S. (2009). Centrifuge ...
  • Taylor, R. N. (1995). Geotechnical Centrifuge Technology. New York, USA: ...
  • Varuso, R., Grieshaber, J. and Nataraj, M. (2005). Geosynthetic reinforced ...
  • Viswanadham, B. and Mahajan, R. (2004). Modeling of Geotextile Reinforced ...
  • Viswanadham, B. _ S. and Konig, D. (2009). Centrifuge modeling ...
  • Wang, L., Zhang, G. and Zhang, J.-M. (2011). Centrifuge model ...
  • Yu, Y., Zhang, B. and Zhang, J.-M. (2005). Action mechanism ...
  • Zhang, G., Hu, Y. and Zhang, J.-M. (2009). New image ...
  • Zhang, J., Zheng, J. and Huang, X. (2011). Centrifuge Model ...
  • Zorngerg. J. G., Mitchell, J. K. and Sitar, N. (1997). ...
  • نمایش کامل مراجع