Optimization of galena flotation process of Irankouh complex ore using a statistical design of experiments

Publish Year: 1393
نوع سند: مقاله کنفرانسی
زبان: English
View: 612

This Paper With 11 Page And PDF Format Ready To Download

  • Certificate
  • من نویسنده این مقاله هستم

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این Paper:

شناسه ملی سند علمی:

CBGCONF02_059

تاریخ نمایه سازی: 9 فروردین 1395

Abstract:

In this research the Taguchi and Response Surface method (RSM) were used to optimize the galena flotation process. The combination of Taguchi and RSM minimized the number of required experiments and gives the optimum condition. The effect of chemical parameters, namely type and dosage of collectors, dosage of starch, sodium cyanide, pH and neutralizing agent were investigated. The other parameters were selected in accordance with the condition being applied in the rougher stage flotation plant of Irankouh (Bama Co.), where the samples were chosen from. The total number of experiments designed with Taguchi and RSM for modeling the process was 42; instead of 240 experiments needed if only RSM is applied. In order to achieve the required experiments initially, the most important parameters were identified using Taguchi method and were optimized using response surface methodology (RSM). The results of experiment based on the industrial condition with no optimization showed lead recovery of 79%, zinc recovery of 23.2% and the grade of lead was 13.2%. After optimization no reduction in the grade of concentrates happened while the lead recovery was increased to 87% and zinc recovery was decreased to 17.3%, which shows a 10.1% and 25.3% improvement in lead and zinc recovery, respectively.

Authors

Soroush Rahmati Shahreza

School of Mining Engineering, University College of Engineering, University of Tehran, Tehran, Iran

Seyed Ziaodin Shafaei

School of Mining Engineering, University College of Engineering, University of Tehran, Tehran, Iran

Mohammad Noaparast

School of Mining Engineering, University College of Engineering, University of Tehran, Tehran, Iran

Mehdi Nasiri Sarvi

Department of Mining Engineering, Isfahan University of Technology, Isfahan, Iran

مراجع و منابع این Paper:

لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :
  • Azizi, D., Shafaei, S.Z., Noaparast, M. and Abdollahi, H. (2012), ...
  • Anderson, M.J and Whitcomb, P.J. (2005), "RSM simplified: optimizing processes ...
  • Rajashekhar, M.R. and Ellingwood, B.R. (1993), "A new look at ...
  • Myers, R.H., Montgomery, D.C. and Anders on-Cook, C.M. (2009), "Response ...
  • Gunaraj, V. and Murugan, N. (1999), "Application of response surface ...
  • Kwak, J.S. (2005), "Application of Taguchi and response surface methodologies ...
  • Aslan, N. (2007), "Application of response surface methodology and central ...
  • Aslan, N. (2007), "Modeling and optimization of Multi-Gravity Separator to ...
  • نمایش کامل مراجع