Study on the effect of prepolymerization parameters on catalyst performance in propylene slurry polymerization using heterogeneous Ziegler natta catalyst
Publish place: 5th International Congress on Chemical Engineering
Publish Year: 1386
نوع سند: مقاله کنفرانسی
زبان: English
View: 1,638
This Paper With 8 Page And PDF Format Ready To Download
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ICHEC05_187
تاریخ نمایه سازی: 7 بهمن 1386
Abstract:
the effect of time, temperature and prepolymerization methode on melt flow index and bulk density of polypropylene particles and catalyst activity were studied. Slurry polymerization of propylene was carried out using a commercially available 4th Ziegler natta catalyst, Tri-ethyl aluminum as co catalyst and cyclohexil methyl dimethoxy silane as an external electron donor. Prepolymerization was carried out in two modes: isothermal (IPP) and nonisothermal (NIPP). The increasing of prepolymerization temperature causes to increase catalyst activity and bulk density. It also increases primarily melt flow index and then decreases it. In NIPP the catalyst activity and bulk density increase with initial reaction temperature but MFI of product dose not show a specificsensitivity. SEM photographs show that polymer products are relatively large and have a spherical morphology.
Keywords:
Authors
Pircheraghi
Polymer Engineering Department, Amirkabir University of Technology, Tehran, Iran
Pourmahdian
Polymer Engineering Department, Amirkabir University of Technology, Tehran, Iran
Vatankhah
Polymer Engineering Department, Amirkabir University of Technology, Tehran, Iran
مراجع و منابع این Paper:
لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :