ناشر تخصصی کنفرانس های ایران

لطفا کمی صبر نمایید

Publisher of Iranian Journals and Conference Proceedings

Please waite ..
Publisher of Iranian Journals and Conference Proceedings
Login |Register |Help |عضویت کتابخانه ها
Paper
Title

Application of Taguchi Method in the Optimization of ARC- Carbon Nanotubes Fabrication

Year: 1386
COI: ICHEC05_403
Language: EnglishView: 2,210
This Paper With 7 Page And PDF Format Ready To Download

Buy and Download

با استفاده از پرداخت اینترنتی بسیار سریع و ساده می توانید اصل این Paper را که دارای 7 صفحه است به صورت فایل PDF در اختیار داشته باشید.
آدرس ایمیل خود را در کادر زیر وارد نمایید:

Authors

Mohsen Jahanshahi - Nanobiotechnology Research Lab., Faculty of Chemical Engineering, Babol University of Technology, Babol, Iran.
Jahan-bakhsh Raoof - Electroanalytical Chemistry Research Laboratory, Department of Chemistry, Faculty of Basic Science, Mazandaran University, Babolsar,Iran
Solmaz Hajizadeh - Nanobiotechnology Research Lab., Faculty of Chemical Engineering, Babol University of Technology, Babol, Iran.
Razieh Jabari Seresht - Nanobiotechnology Research Lab., Faculty of Chemical Engineering, Babol University of Technology, Babol, Iran.

Abstract:

Carbon nanotubes (CNTs), generated by rolling a layer of graphite into a seamless and hollow cylinder, can be divided into multi-walled carbon nanotubes (MWCNTs) and single-walled carbon nanotubes (SWCNTs) based on the numbers of carbon atom layers of the wall of the nanotubes. Since its discovery in 1991, CNTs have been the subject of numerous investigations in chemical, physical and materials areas due to their novel structural, mechanical, electronic, and chemical properties. The CNTs can be produced by different processes, such as arc-discharge, chemical vapor deposition (CV D) and laser ablation. In this study we synthesized CNTs by liquid arc discharge method along with a purification stage then a statistical design of experiments (DOE), Taguchi method (Qualitek4) was implemented to optimize experimental condition of this study. Voltage, current, catalyst and plasma were considered as process parameters to be optimized. As the result of taguchi analysis in this study, Voltage, current, catalyst were the most influencing parameters on the yield product of carbon Nanotubes. The maximum yield product of CNTs were obtained at 25v voltage, LiCI as a salt in solution, Ni/Mo as a catalyst and the ½ as a catalyst ratio (~6.89 mgr purred CNTs).

Keywords:

Carbon nanotube , liquid arc discharge , synthesis , optimization , Taguchi method 1. INTRODUCTION

Paper COI Code

This Paper COI Code is ICHEC05_403. Also You can use the following address to link to this article. This link is permanent and is used as an article registration confirmation in the Civilica reference:

https://civilica.com/doc/46253/

How to Cite to This Paper:

If you want to refer to this Paper in your research work, you can simply use the following phrase in the resources section:
Jahanshahi, Mohsen and Raoof, Jahan-bakhsh and Hajizadeh, Solmaz and Jabari Seresht, Razieh,1386,Application of Taguchi Method in the Optimization of ARC- Carbon Nanotubes Fabrication,5th International Congress on Chemical Engineering,Kish Island,https://civilica.com/doc/46253

مراجع و منابع این Paper:

لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :

  • دانشگاه صنعتی نوشیروانی بابل، گروه مهندسی شیمی، آزمایشگاه تحقیقاتی نانوبیوتکنولوژی ...
  • Research Info Management

    Certificate | Report | من نویسنده این مقاله هستم

    اطلاعات استنادی این Paper را به نرم افزارهای مدیریت اطلاعات علمی و استنادی ارسال نمایید و در تحقیقات خود از آن استفاده نمایید.

    Scientometrics

    The specifications of the publisher center of this Paper are as follows:
    Type of center: دانشگاه دولتی
    Paper count: 6,073
    In the scientometrics section of CIVILICA, you can see the scientific ranking of the Iranian academic and research centers based on the statistics of indexed articles.

    New Papers

    Share this page

    More information about COI

    COI stands for "CIVILICA Object Identifier". COI is the unique code assigned to articles of Iranian conferences and journals when indexing on the CIVILICA citation database.

    The COI is the national code of documents indexed in CIVILICA and is a unique and permanent code. it can always be cited and tracked and assumed as registration confirmation ID.

    Support