Effect of SiC additive on compressive behavior of Al foams
Publish Year: 1395
نوع سند: مقاله کنفرانسی
زبان: English
View: 662
This Paper With 5 Page And PDF Format Ready To Download
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
CFCA01_015
تاریخ نمایه سازی: 16 شهریور 1395
Abstract:
Aluminum foams are group of metal foams and the most important with several applications. In this research Al/SiC composite foams are produced by casting in which foaming factor is CaCO3 and by addition of different concentration of SiC (5, 10, 15 vol%). The effects of SiC on compressive behavior of the composite foams are investigated. Results show that the yield stress of Al/SiC composite foams with different SiC content increases with increase of the volume fraction of SiC particles. Under external load, SiC particles pin the crossing dislocations and alter plastic Al foams into brittle composite foams; therefore the yield stress of foams increases with increasing the SiC content
Keywords:
Authors
Fakhrodin Lalegani
Mechanics Division, Faculty of Engineering, Islamic Azad University, Shahrekord Branch, Shahrekord, Iran
Azam Beigi Kheradmand
Mechanics Division, Faculty of Engineering, Islamic Azad University, Shahrekord Branch, Shahrekord, Iran
مراجع و منابع این Paper:
لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :