CUBIC B-SPLINE APPROXIMATION METHOD FOR 3D SIMULATION OF ELECTROSPUN NANOFIBER JET
عنوان مقاله: CUBIC B-SPLINE APPROXIMATION METHOD FOR 3D SIMULATION OF ELECTROSPUN NANOFIBER JET
شناسه ملی مقاله: TCPCO03_153
منتشر شده در سومین همایش ملی تکنولوژی های نوین در شیمی،پتروشیمی و نانو ایران در سال 1395
شناسه ملی مقاله: TCPCO03_153
منتشر شده در سومین همایش ملی تکنولوژی های نوین در شیمی،پتروشیمی و نانو ایران در سال 1395
مشخصات نویسندگان مقاله:
Sh Maghsoodlou - Textile Engineering Department, Faculty of Engineering, University of Guilan,
B Noroozi - Textile Engineering Department, Faculty of Engineering, University of Guilan,
A. K Haghi - Textile Engineering Department, Faculty of Engineering, University of Guilan
خلاصه مقاله:
Sh Maghsoodlou - Textile Engineering Department, Faculty of Engineering, University of Guilan,
B Noroozi - Textile Engineering Department, Faculty of Engineering, University of Guilan,
A. K Haghi - Textile Engineering Department, Faculty of Engineering, University of Guilan
To optimize electrospinning process, the B-spline collocation methods and a new ODEs solver based on B-spline quasi-interpolation are developed. The problem consists of nonlinear ordinary differential equations. To solve the system of ODE, a 3D simulation obtained by applying quartic B-spline collocation method. To achieve this, the Reneker's model (i.e. bead-spring model) applied and the governing equations were numerically simulated by new ODEs solver without using perturbation equations in x and y directions. Most likely, this technique can represent the results the random perturbation. The results show that it could be possible to build mathematically a real-time simulation
کلمات کلیدی: B-Spline approximation method, Electrospinning process, Reneker's model, Simulation improvement
صفحه اختصاصی مقاله و دریافت فایل کامل: https://civilica.com/doc/490985/