Effects of additional holes diameter on transient thermal fatigue life
Publish place: اولین کنفرانس بینالمللی مهندسی مکانیک و هوافضا
Publish Year: 1395
نوع سند: مقاله کنفرانسی
زبان: English
View: 743
This Paper With 5 Page And PDF and WORD Format Ready To Download
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
MECHAERO01_008
تاریخ نمایه سازی: 21 شهریور 1395
Abstract:
A series of finite element models were conducted in ASTM- A395 elastic– perfectly plastic ductile cast iron to investigate the effect of additional holes diameter on the transient thermal fatigue behavior of single hole specimens containing hole edge cracks. The Abaqus finite element package was used to modeling. The Abaqus data file for the uncracked mesh was read and processed by Zencrack fracture mechanics code. The energy release rate was used to drive crack growth calculations. Then it was discussed how the reduction of transient thermal stress distribution around the basic single hole affected the transient thermal fatigue life of the single hole specimens. The results show that transient thermal fatigue life and stress distribution factor at the edge of a base hole was affected by variations in diameter of the additional holes. The results from the numerical predictions are compared with experimental data
Keywords:
Single hole specimens , Transient thermal fatigue life , Transient thermal stress distribution , Additional holes diameter
Authors
h bazvandi
University of Zanjan, Iran
e poursaeidi
University of Zanjan, Iran
b sepehri
Islamic Azad University of Khorramabad, Iran
مراجع و منابع این Paper:
لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :