Exprimental investigation of MQL Lubricating method on Machining C60 Steel

Publish Year: 1395
نوع سند: مقاله کنفرانسی
زبان: English
View: 637

This Paper With 7 Page And PDF Format Ready To Download

  • Certificate
  • من نویسنده این مقاله هستم

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این Paper:

شناسه ملی سند علمی:

DCEAEM03_163

تاریخ نمایه سازی: 22 آبان 1395

Abstract:

Experimentally investigation of the effect of cooling method on surface roughness of C60 steel in turning process is main aim of current paper. In order to reach this purpose, dry machining, flood and minimal quantity lubricant (MQL) cooling methods were examined. Design of experiments was done by Taguchi method. The effects of cutting velocity, feed rate and depth of cut were also studied. The results show that MQL method has a positive and undeniable influence on surface roughness. The numerical finding exhibits MQL method improve the surface roughness approximately 35% and 17% in comparison with dry and flood machining, respectively. The surface by better quality was also obtained by setting high cutting velocity, low feed rate and medium cutting depth.

Authors

Ebrahim Shojaei

Lecturer Mechanic Department, Tabriz Technical College, Technical and Vocational University

Ayub Karimzad Ghavidel

Lecturer Mechanic Department, Tabriz Technical College, Technical and Vocational University

Azam Akhtari

Alvand kariz company

مراجع و منابع این Paper:

لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :
  • ]1Elshwain A, Redzuan N. Effect of Coo _ ing/Lubrication Using ...
  • Davim J, Sreejith P, Gomes R, Peixoto C. Experimental studies ...
  • Braga DU, Diniz AE, Miranda GW, Coppini NL. Using a ...
  • Dhar N, Kamruzzamar M, Ahmed M. Effect of minimum quantity ...
  • Barczak L, Batako A, Morgan M. A study of plane ...
  • Hadad M, Sadeghi B. Minimum quantity lubric ation-MQL turning of ...
  • Zhang S, Li J, Wang Y .Tool life and cutting ...
  • Taguchi G, Yokoyama Y. Taguchi methods: design of experiments: Amer ...
  • Center MD. Machining data handbook MDC; 1980. ...
  • Boothroyd G. Fundamentals of metal machining and machine tools: Crc ...
  • نمایش کامل مراجع