Three-phase flow modeling of oil, water and sand particles inoil transportation pipelines
عنوان مقاله: Three-phase flow modeling of oil, water and sand particles inoil transportation pipelines
شناسه ملی مقاله: CHECONF03_242
منتشر شده در سومین کنفرانس بین المللی دستاوردهای نوین پژوهشی در شیمی و مهندسی شیمی در سال 1395
شناسه ملی مقاله: CHECONF03_242
منتشر شده در سومین کنفرانس بین المللی دستاوردهای نوین پژوهشی در شیمی و مهندسی شیمی در سال 1395
مشخصات نویسندگان مقاله:
R Ranjbarnouri - Department of Chemical Engineering, Amirkabir University of Technology, Tehran, Iran.
M Dadvar - Department of Chemical Engineering, Amirkabir University of Technology, Tehran, Iran.
B Dabir - Department of Chemical Engineering, Amirkabir University of Technology, Tehran, Iran.
خلاصه مقاله:
R Ranjbarnouri - Department of Chemical Engineering, Amirkabir University of Technology, Tehran, Iran.
M Dadvar - Department of Chemical Engineering, Amirkabir University of Technology, Tehran, Iran.
B Dabir - Department of Chemical Engineering, Amirkabir University of Technology, Tehran, Iran.
Sand deposition in oil transport pipelines can cause erosion of pipes and subsequently adverse effects on oil production. Presence of water cut along with the extracted oil rises the necessity of considering a multiphase flow problem. CFD can help one to understand and control behavior of such multiphase flow transport. Eulerian multiphase model was used to simulate hydrodynamics of oil, water and sand particles transport. Simulations were conducted using Ansys Fluent 15.0 software package. The aim of the present work was to investigate effects of variations of inlet velocity on the behavior of sand deposition in a 9.12 meter pipe length. It was concluded that providing an inlet velocity higher than 1.5m/s can decrease the deposition significantly
کلمات کلیدی: multiphase flow, Oil transportation, CFD, Sand particles
صفحه اختصاصی مقاله و دریافت فایل کامل: https://civilica.com/doc/530868/