Reduction of Vibration by use of an optimal dynamic vibration Absorber for machine tools

Publish Year: 1395
نوع سند: مقاله کنفرانسی
زبان: English
View: 686

This Paper With 16 Page And PDF Format Ready To Download

  • Certificate
  • من نویسنده این مقاله هستم

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این Paper:

شناسه ملی سند علمی:

ICEASCONF02_152

تاریخ نمایه سازی: 25 آذر 1395

Abstract:

Machine tools is a machine for shaping or machining metal or other rigid materials, usually by cutting, boring, grinding, shearing or other forms of deformation. Vibration is an undesired phenomenon in machine tools and can Increase their performance negatively. In this work reduction of undesired vibrations in machine tools has been investigated. The machine tools has been simulated as a five-degree-of-freedom discrete system. Subsequently, in order to reduce the undesired vibrations of the system a dynamic vibration absorber with two unknown parameters has been added to the system in different positions, consequently, one degree has been added to the degree-of-freedom of the system and has been reached to six. Then the governing equations have been obtained by utilizing Newton‟s second law and the equations have been solved. For each position optimum values of unknown parameters (mass absorber , stiffness absorber have been acquired through trial and error to obtain minimum vibration amplitude in the components of machine tools. The results have shown that the head of the machine tool was the best palace to add the vibration absorber also this absorber has least cost between obtained optimum absorbers. The two parameters were obtained for optimal Absorber 5 kg and respectively

Authors

Abolfazl lotfi-aski

Department of Agricultural machinery Mechanical Engineering, Science and Research branch, Islamic Azad University, Tehran, Iran.

Behzad Mohammadi-Alasti

Department of Agricultural Machinery Mechanical Engineering, Islamic Azad University, Bonab Branch, Bonab, Iran

Mohammad Homaei;

Department of Agricultural Machinery Mechanical Engineering, Islamic Azad University, Bonab Branch, Bonab, Iran

Ghader Rezazadeh

Department of Agricultural Machinery Mechanical Engineering, Islamic Azad University, Bonab Branch, Bonab, Iran

مراجع و منابع این Paper:

لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :
  • A.A. Tootoonchi &M. S. Gholami. (201 1).:Application of time delay ...
  • Esref Eskinat, and Levent Oztirk.(20 12)."Vibration Absorbers as Controllers" Bogazi;i ...
  • P. Varpasuo.(200 1). optimization of designs one mas. dynamic vibration ...
  • Kefu Liu, and Gianmar Coppola. (2010). "Optimal design of damped ...
  • G. S. Duncan, M. F. Tummond, T. L. Schmitz. (2005). ...
  • Y. A. Amer (2007). "Vibration control of ultrasonic cutting via ...
  • Analysis and Design of Dynamic Absorber in a Vertical Vibrationء. ...
  • Shin YC, Wang KW.(1 991)."Design of an optimal damper to ...
  • Wang B.P., Kitis L., Pilkey D., Palazzolo A.(1985). "Synthesis of ...
  • Y.L. Cheung and W.O.Wong. (2009) .:Optimization of Dynamic Vibration Absorbers ...
  • Sebastien seguy, tamas insperger, lionel arnaud, gilles dessein, gregoire peigne.(2010). ...
  • Bengt A Akesson, Tore L E Dahlberg. (_ 985).:Reduction of ...
  • Y. Yang, J.Munoa, Y. Altintas. (2010) .:Optimization of multiple tuned ...
  • G. B. Warburton (_ 9 82).:Optimum absorber parameters for various ...
  • Mehmet Bulent Ozer, Thomas j. Royston. (2004). "Extending Den Hartog's ...
  • نمایش کامل مراجع