One-Step Electrochemical Synthesis of Polypyrrole-Graphene Nanocomposite Film on the Copper and Its Corrosion Protection Performance
Publish place: 11th Annual Electrochemistry Seminar of Iran
Publish Year: 1394
نوع سند: مقاله کنفرانسی
زبان: English
View: 298
متن کامل این Paper منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل Paper (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ELECTROCHEMISTRY011_314
تاریخ نمایه سازی: 5 بهمن 1395
Abstract:
Electropolymerized polymer coatings on copper can replace for the carcinogenic chromate coating [1]. In this work, the corrosion protection ability of electropolymerized polypyrrolegraphene(Ppy-G) nanocomposite coating on has investigated by using the cyclic voltammetry method [2]. The synthesized coatings were characterized by Fourier Transform InfraredSpectroscopy (FT-IR), UV-visible absorption spectrometry and Scanning Electron Microscopy(SEM). The anticorrosion performances of nanocomposite coatings were investigated in 5000 ppm NaCl solution by the potentiodynamic polarization technique and electrochemical impedance spectroscopy (EIS). Corrosion protection is often afforded by isolating the metal from the corrosive environment by using polymer coatings. The current corrosion decreases significantly from 3.3 μAcm-2 for uncoated copper to 0.095 μAcm-2 for Ppy-G nanocompositecoated copper. The corrosion rate of the nanocomposite coated copper is found to be 7.08×10-4mmyear-1, which is ~50 times lower than that observed for bare copper. The potential corrosionincreases from -0.84 V versus Ag/AgCl for uncoated copper to -0.78V versus Ag/AgCl for nanocomposite coated copper electrode. The positive shift (anodic protection) of ~0.06V in potential corrosion indicates the protection of the copper surface by the Ppy-G nanocomposite coatings. The EIS results are in good agreement with the potentiodynamic polarizationmeasurements. This study demonstrates that Ppy-G nanocomposite has excellent corrosion protection properties and can be consider a potential coating material for the corrosion protection of copper in aqueous 5000 ppm NaCl.
Keywords:
Authors
Yaser Jafari
Department of Analytical Chemistry, Faculty of Chemistry, University of Kashan, Kashan, I.R. Iran
Sayed Mehdi Ghoreishi
Department of Analytical Chemistry, Faculty of Chemistry, University of Kashan, Kashan, I.R. Iran
مراجع و منابع این Paper:
لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :