Effect of Melt Temperature and Al-5Ti-1B Grain Refiner in Powder Form on the Ultimate Strength Value of Commercially Pure Aluminium

Publish Year: 1395
نوع سند: مقاله کنفرانسی
زبان: English
View: 393

This Paper With 8 Page And PDF Format Ready To Download

  • Certificate
  • من نویسنده این مقاله هستم

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این Paper:

شناسه ملی سند علمی:

IMES10_106

تاریخ نمایه سازی: 6 اردیبهشت 1396

Abstract:

In the present investigation, the effect of Al-5Ti-1B grain refiner in powder form with two different powder weight percent, as well as three different melting temperature on ultimate strength of commercially pure Aluminium have been studied. Melt directory done in from end of sample (Directional Solidification). Experimental temperatures selected as follows: 720,760 and 800 0C. A comparative study on ultimate strength of commercially pure aluminium with 0.5% and 2% powder grain refiner was carried out. Results show that to obtain higher ultimate strength value, we should optimize grain refiner amount a melt temperature.

Authors

Mir Saman Safavi

MS student Faculty of Mechanical Engineering, University of Tabriz, Tabriz, Iran

Gholamreza Marami

Faculty of Mechanical Engineering, University of Tabriz, Tabriz, Iran

Ali Rasooli

Faculty of Mechanical Engineering, University of Tabriz, Tabriz, Iran

مراجع و منابع این Paper:

لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :
  • Carle D., Blount G., The suitability of aluminium as an ...
  • Cibula A., The mechanism of grain refinement of sand castings ...
  • Murty B., Kori S., Chakraborty M., Grain refinement of aluminium ...
  • Eskin D., Katgerman L, Effects of Process Parameters on the ...
  • Eskin D., Savran V., Katgerman L, Effects of melt temperature ...
  • Reese J.M., C haracterization of the flow in the molten ...
  • Yang L., The effect of casting temperature on the properties ...
  • Li P., Nikitin V., Kandalova E., Nikitin K., Effect of ...
  • Easton M., StJohn D., A model of grain refinement incorporating ...
  • Easton M., Stjohn D., Grain refinement of aluminum alloys: Part ...
  • Mohanty P., Gruzleski J., Mechanismm of grain refinement in aluminium, ...
  • نمایش کامل مراجع