Buttering in Order to Repair Welding of Aged IN-519 Steel
Publish place: 10th joint meeting of the 5th International Conference on Materials and Metallurgical Engineering Society and Iranian Foundry Society
Publish Year: 1395
نوع سند: مقاله کنفرانسی
زبان: English
View: 457
This Paper With 10 Page And PDF Format Ready To Download
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
IMES10_411
تاریخ نمایه سازی: 6 اردیبهشت 1396
Abstract:
In present study repair welding was accomplished on heat-resistant cast steel tube IN-519 which was utilized in hydrogen reformer furnace at 871 ◦C for 80000 hours. Gas tungsten arc welding (GTAW) was performed for repairing. Optical microscopy (OM), scanning electron microscopy (SEM) and X-ray diffractometry (XRD) were carried out to study microstructure of the aged specimen. Heat affected zone (HAZ) of specimen selected from radiation zone (the place where torch’s flame are directly in contact with the tube, RZ) had cracks after welding and it is not desirable. In order to prevent cracking in repair welding of brittle zone, buttering was investigated. Buttering with Inconel 82 as filler could almost prevent cracking but it couldn’t be completely effective because of the result in bending test. Mechanical tests were performed in order to investigate the repair quality.
Keywords:
Authors
n Sohrabi
Graduate student at school of metallurgy and materials science
s.f Kashani Bozorg
Associate professor at school of metallurgy and materials science, College of Engineering, University of Tehran, Tehran, Iran
m Sadeghi
Welding Engineer
مراجع و منابع این Paper:
لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :