Fabrication and characterization of microporous polymeric filters using sintering technique

Publish Year: 1395
نوع سند: مقاله کنفرانسی
زبان: English
View: 323

متن کامل این Paper منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل Paper (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.

  • Certificate
  • من نویسنده این مقاله هستم

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این Paper:

شناسه ملی سند علمی:

ISPST12_399

تاریخ نمایه سازی: 6 اردیبهشت 1396

Abstract:

Nowadays the filtration process is being increasingly used in various areas such as water purification, food industries, filtering air dust and other separation applications. In this work, the HDPE microporous filters have been fabricated via sintering process and characterized using different methods such as DSC, optical microscopy and permeability test. Based on DSC results the sintering temperature was selected in the vicinity of melting temperature of used HDPE powder, i.e. 127-129 °C. Permeability test results showed that with increasing the sintering temperature from 128 °C to 129 °C the liquid permeability is strongly reduced indicating formation of non-porous solid material. In other words, sintering temperature is a key processing parameter with a strong impact on microstructure development and final properties of the prepared filters

Authors

Meysam Salari

Polymeric Materials Research Group, Department of Materials Science and Engineering, Sharif University of Technology

Gholamreza Pircheraghi

Polymeric Materials Research Group, Department of Materials Science and Engineering, Sharif University of Technology

مراجع و منابع این Paper:

لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :
  • Journal 49.6 (2013): 1654-1661. ...
  • Jayaraman, Gowri Shankar, et al. Polymer Engineering & Science 16.8 ...
  • Truss, R. W., et al. Polymer Engineering _ Science 20.1 ...
  • Azhdar, Bruska, Bengt Stenberg, and Leif Kar. Polymer Testing 24.7 ...
  • Jauffres, David, et al. Acta materialia57 .8 (2009): 2550-2559. ...
  • Hornsby, P. R., and A. S. Maxwell. Journal of materials ...
  • نمایش کامل مراجع