Rubber Toughened Polyamide6 nanocomposites: Microstructure-Properties Correlation

Publish Year: 1393
نوع سند: مقاله کنفرانسی
زبان: English
View: 418

متن کامل این Paper منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل Paper (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.

  • Certificate
  • من نویسنده این مقاله هستم

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این Paper:

شناسه ملی سند علمی:

ISPST11_505

تاریخ نمایه سازی: 6 اردیبهشت 1396

Abstract:

Maleic-anhydride grafted ethylene-propylene diene monomer (EPDM-g-MA) toughened polyamide6 (PA6) nanocomposites containing carbon nanotubes (CNT) were prepared using laboratory internal mixer at 230°C. Effect of different blend composition ratios on the mechanical and structural properties of the nanocomposites was investigated. Results showed that upon the addition of CNT, a significant improvement is observed in the impact strength and elongation at break retaining the tensile modulus to a sufficiently high value. Microstructural observation of the sample fracture surfaces revealed a toughened microstructure.

Keywords:

PA6- CNT- Nanocomposite- Microstructure- Mechanical Properties

Authors

Shirin Shokoohi

Polymer Science and Technology Department, Research Institute of Petroleum Industry, P.O. Box 14115-143, Tehran, Iran.

Farhad Naderpoor

Department of Polymer Engineering, Tehran-South Branch, Azad University, Tehran, Iran.

Ghasem Naderi

Department of Rubber, Iran Polymer and Petrochemical Institute, P.O. Box 14565-115, Tehran, Iran.

Mohamadreza Kalaei

Department of Polymer Engineering, Tehran-South Branch, Azad University, Tehran, Iran.