Compatibilized Polyamide6/Ethylene–Propylene–Diene Monomer/Polyethylene ternary blends: Effect of twin screw extruder processing parameters
عنوان مقاله: Compatibilized Polyamide6/Ethylene–Propylene–Diene Monomer/Polyethylene ternary blends: Effect of twin screw extruder processing parameters
شناسه ملی مقاله: ISPST10_513
منتشر شده در دهمین سمینار بین المللی علوم و تکنولوژی پلیمر در سال 1391
شناسه ملی مقاله: ISPST10_513
منتشر شده در دهمین سمینار بین المللی علوم و تکنولوژی پلیمر در سال 1391
مشخصات نویسندگان مقاله:
Mohammad Hosein Tabib Shoushtari - Polymer Engineering Department, Amirkabir University of Technology, P.O. Box 5875/4413, Tehran, Iran
Mehdi Mazaherikia - Polymer Engineering Department, Amirkabir University of Technology, P.O. Box 5875/4413, Tehran, Iran
Ahmad arefazar - Polymer Engineering Department, Amirkabir University of Technology, P.O. Box 5875/4413, Tehran, Iran
خلاصه مقاله:
Mohammad Hosein Tabib Shoushtari - Polymer Engineering Department, Amirkabir University of Technology, P.O. Box 5875/4413, Tehran, Iran
Mehdi Mazaherikia - Polymer Engineering Department, Amirkabir University of Technology, P.O. Box 5875/4413, Tehran, Iran
Ahmad arefazar - Polymer Engineering Department, Amirkabir University of Technology, P.O. Box 5875/4413, Tehran, Iran
Blending polymers is an effective way to manufacture materials with specific properties. Most polymers are immiscible. Therefore, blending them usually leads toheterogeneous morphologies. In most cases, blending of polymers without compatibilizers has not led to enhanced properties in final products. Therefore, compatibilizationtechniques have been widely used to increase interfacial adhesion in such blends and, as a result, to improve their usage properties
صفحه اختصاصی مقاله و دریافت فایل کامل: https://civilica.com/doc/579880/