EFFECT OF REBAR ON COMPRESSIVE STRENGTH OF CONCRETE CORES

Publish Year: 1388
نوع سند: مقاله کنفرانسی
زبان: English
View: 3,145

This Paper With 7 Page And PDF Format Ready To Download

  • Certificate
  • من نویسنده این مقاله هستم

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این Paper:

شناسه ملی سند علمی:

ICCD03_095

تاریخ نمایه سازی: 20 مهر 1387

Abstract:

Concrete coring is used for determining compressive strength of hardened concrete of elements to evaluate low-strength-test-result concrete or to understand concrete placing quality of existing structure. In safety evaluation of existing structures that need rehabilitation and retrofitting, it's necessary to have some information about existing concrete. The best and most accurate method to determine compressive strength of existing concrete is coring. Rebars always make difficulty in coring of reinforced concrete structures. Sometimes it is not possible to core from plain concrete areas. There are serious considerations for effects of rebar on compressive strength of concrete cores in some countries. There is no strength correction for the effect of rebars in ACI and also in Iranian related codes and specifications. There is only an Concrete Society equation in publication no.207 of BHRC based on result corrections of cores contained rebars perpendicular to cores longitudinal axes. This correction does not exceed 10%. Dealing with such problems in a project and because there was sureness about strength of placed concrete, but strength of coreswas highly lower and it was not possible to obtain plain core as there was heavy rebar concentration, it was necessary to study rebar effects on core strength. In this research, strength of cores of an element contained rebars and plain ones were compared to evaluate above mentioned equations. Also some cylindrical samples were made and tested with placed rebars. In addition if the core has uncut rebars, there will be no significant reduction in its strength. It seems that cutting of rebars in coring process has little effects on concrete quality. It is due to cracks formation between concrete and rebars that reduce the concrete strength.

Authors

M Tadayon

Associate professor, Civil Eng. Dept., Engineering Faculty, Bu-AliSina University, Hamedan, Iran

H.T.P Moghadam

Graduate of Iran University of Science and Technology Civil Engineering Faculty, Tehran, Iran

M.H Tadayon

.S. Student, Dept of civil Eng., Engineering Faculty, University of Tehran, Tehran, Iran

مراجع و منابع این Paper:

لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :
  • ACI Committee 318, "Building Code Requirements for Structural Concrete (ACI ...
  • ASTM, "Standard Test Method for Obtaining and Testing Drilled Cores ...
  • State Management and Planning Organization, "Concrete Code of Iran", Office ...
  • Ministry of Housing and Urban Development, "Iranian National Building Code", ...
  • Concrete Society Technical Report no.11, "Concrete Core Testing for Strength", ...
  • _ Neville, A.M., *Properties of Concrete'; Forth Edition, Wiley & ...
  • Ramez anianpour, A.A., Hamidian, M.R., _ Non-D estructive Testing of ...
  • نمایش کامل مراجع