Correction of Drill-off Test Error Using Artificial Neural Network andMechanical Specific Energy
Publish place: 2rd National Conference on petroleum geomechanics
Publish Year: 1395
نوع سند: مقاله کنفرانسی
زبان: English
View: 513
متن کامل این Paper منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل Paper (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.
- Certificate
- من نویسنده این مقاله هستم
این Paper در بخشهای موضوعی زیر دسته بندی شده است:
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
NPGC02_053
تاریخ نمایه سازی: 10 تیر 1396
Abstract:
Drill-off test is used to determine the optimum WOB and RPM during drilling. In this test the WOB that gives the highest ROP is considered as the optimal value. In 1991, Bourgoyne et.al introduced the maximum rate of penetration point as a non-optimal point because at this point available hydraulic cant clean underneath the bit and the bit crushes cuttings from previous step for another time, causing over wearing of the bit, bit balling and vibrations. The point that has the minimum MSE and maximum mechanical efficiency is the optimal point. This point is called founder point.
Keywords:
Authors
Hossein Yavari
M.Sc Student at Amirkabir Universityof Technology, Drilling Engineering
Mohammad Fazaelizadeh
Faculty Member of Amirkabir University of Technology
Rasool Khosravanian
Faculty Member of Amirkabir University of Technology
Vahab Hassani
Head of Bit Operation & Drilling Optimization, Dana Energy