MEHDALİ ZAMANI - Mechanical Department, KN. Toosi University of Technology, Tehran, Iran Advanced Materials and Nanotechnology Research Lab
ALI SHOKUHIFAR - Mechanical Department, KN. Toosi University of Technology, Tehran, Iran Advanced Materials and Nanotechnology Research Lab
EBRAHIMIEGHDAM Mechanical - Department, KN. Toosi University of Technology, Tehran, Iran Advanced Materials and Nanotechnology Research Lab
MORTEZA AMRONI. HOSSANI - chemistry d Envcronimmtal Department, SAPCO (supplying automotive parts co.), Tehran, Iran

In the present research, SiO2-TiO2 nanostructure films were successfully prepared on windshields using the sol-gel technique for photocatalytic applications. To prevent the thermal diffusion of the sodium ions from the glass to TiO, films, the SiO2 layer was pre-coated on the glass by the sol-gel method. The substrates were dipped in the sol and withdrawn with the speed of 6cm/min to make a gel coating film. The coated films were dried for 2 days at 27 °C to allow slow solvent evaporation and condensation reactions due to rapid sol-gel reaction of titania precursor. Then, the films were annealed at 100 °C for 30min and at the final temperature (500, 700 °C) for 30 min continuously. The structure and surface morphology properties, which are as a function of annealing temperature, have been studied by SEM; FE-SEM and XRD. The FE-SEM surface morphology results indicate that the particle size increases from 19 to 42 nm by increasing the annealing temperature from 500 °C to 700 °C. Likewise, XRD illustrate the crystal anatase and rutile as main phases for TiO,-SiO, films annealed at 500 C and 700 Crespectively. This procedure resulted in transparent, crack-free SiO TO films.

SiO, TiO2; thin films, sol-gel, dip coating