Design and Experimentation of Roll Bond Evaporator for Room Air Conditioner with R-22 as Refrigerant

Publish Year: 1396
نوع سند: مقاله ژورنالی
زبان: English
View: 336

This Paper With 9 Page And PDF Format Ready To Download

  • Certificate
  • من نویسنده این مقاله هستم

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این Paper:

شناسه ملی سند علمی:

JR_IJE-30-5_002

تاریخ نمایه سازی: 6 شهریور 1396

Abstract:

The world is looking towards producing products which consume less power without compromising on quality of life. The increase in use of refrigeration and air conditioning appliances are contributing to global warming. The world wide temperatures are shooting up at an increasing rate. This paperpresents a design of roll bond evaporator as the heat exchanger to provide cooling in room air conditioner. Presently all room air conditioners use tube and fin evaporators. This study presents rollbond evaporator as a power saving alternative to tube and fin evaporator. The experimentation has been done and comparative study of roll bond evaporator with that of tube and fin evaporator ispresented. It was found out that while the tube and fin evaporator took 30 minutes to get a uniform temperature of 25 ºC in the room, the roll bond evaporator took only 25 minutes to get that uniform temperature, thereby saving 5 minutes of running of air conditioner

Keywords:

Global Warming , Need for Power Saving , Roll Bond Evaporator

Authors

p.s ravi

Research Scholar, Osmania University, Hyderabad, India

a Krishnaiah

MED, College of Engineering, Osmania University, Hyderabad India

md Azizuddin

Deccan College of Engineering and Technology, Hyderabad, India