Optimum Swept Angle Estimation based on the Specific Cutting Energy in Milling AISI 1045 Steel Alloy
Publish Year: 1396
نوع سند: مقاله ژورنالی
زبان: English
View: 312
This Paper With 6 Page And PDF Format Ready To Download
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_IJE-30-5_006
تاریخ نمایه سازی: 6 شهریور 1396
Abstract:
Mechanical machining processes are common manufacturing strategies to re-shape materials to desired specification. The mechanistic approach has revealed the mechanics of the machining processes withvarious parameters determined. The aim of this work is to investigate the impact of swept angle optimization and their influence on the specific cutting energy in milling AISI 1045 steel alloy. This isachieved by varying the step over at different feed rate values in order to determine the optimizationcriterion for machining. It was observed that an optimum swept angle of 31.8o was appropriate in the elimination of ploughing effect and reducing the specific cutting energy to an optimised minimumvalue. However, higher swept angle of 41.4o increases the specific cutting energy with a higher machine tool power. This is attributable to the reduction in the cycle time caused by shorter toolpathlength. The results obtained further elucidate the knowledge base for the determinations of optimum parameters for sustainable machining and resource efficiency of manufactured products.
Keywords:
Authors
Vincent A. Balogun
College of Engineering, Department of Mechanical & Mechatronics Engineering, Afe Babalola University, Ado Ekiti, Nigeria
Isuamfon F. Edem
Faculty of Engineering, Department of Mechanical Engineering, Akwa Ibom State University, Ikot Akpaden, Uyo, Akwa Ibom State, Nigeria