Evaluation of Ti addition and cooling rate effects on the microstructure and tensile properties of A1-4%Cu-3%Si alloy
Publish place: 4th Iran Aluminum International Conference IIAC2016
Publish Year: 1395
نوع سند: مقاله کنفرانسی
زبان: English
View: 423
This Paper With 6 Page And PDF Format Ready To Download
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
IIAC04_068
تاریخ نمایه سازی: 22 دی 1396
Abstract:
This work carried out to investigate the effect of different amounts of Ti (0.01, 0.05, 0.1 and 0.5) and cooling rate on Al-4%Cu-3%Si alloy. The samples were examined by using optical microscopy (OM) and tensile testing to evaluate the modification efficiency of the alloy with different Ti contents. The optimum level Ti as Al–5Ti–1B grain refiners was found. Decreases grain size and dendrite arm spacing due to increasing cooling rate and Ti grain refiner through reduced sections. Increasing cooling rate results in higher strength and Ti-refined specimens showed highest tensile strength and elongation values
Keywords:
Authors
B Pourbahari
School of Metallurgy and Materials, College of Engineering, University of Tehran, P.O. Box ۱۴۳۹۵-۷۳۱, Tehran, Iran
M Emamy
School of Metallurgy and Materials, College of Engineering, University of Tehran, P.O. Box ۱۴۳۹۵-۷۳۱, Tehran, Iran
M Khosravi
Department of Materials Engineering, Islamic Azad University, South Tehran Branch, Tehran, Iran
M Lotfpour
School of Metallurgy and Materials, College of Engineering, University of Tehran, P.O. Box ۱۴۳۹۵-۷۳۱, Tehran, Iran