Preheating anodes without consumption energy in aluminum reduction cell
عنوان مقاله: Preheating anodes without consumption energy in aluminum reduction cell
شناسه ملی مقاله: IIAC04_083
منتشر شده در چهارمین کنفرانس بین المللی آلومینیوم ایران IIAC۲۰۱۶ در سال 1395
شناسه ملی مقاله: IIAC04_083
منتشر شده در چهارمین کنفرانس بین المللی آلومینیوم ایران IIAC۲۰۱۶ در سال 1395
مشخصات نویسندگان مقاله:
Majid Salehfard - Potroom , Arak, P.O. Box: ۳۱. Iran
Abbas Jalalvandi - Potroom , Arak, P.O. Box: ۳۱. Iran
Mahmoud Pilehvari - Potroom , Arak, P.O. Box: ۳۱. Iran
خلاصه مقاله:
Majid Salehfard - Potroom , Arak, P.O. Box: ۳۱. Iran
Abbas Jalalvandi - Potroom , Arak, P.O. Box: ۳۱. Iran
Mahmoud Pilehvari - Potroom , Arak, P.O. Box: ۳۱. Iran
Anode breakage in the cell is usually either from thermal shock as the anode is set, or late Rota (i.e. anode cycle) cracking. The large carbon pieces that fall into the cell from anode breakage Create major problems: they are hazardous to remove, but if not removed, spikes can form if anodes are set on the carbon pieces, and they degrade over time in the cell to form dust. Appling anode in cold weather, waste many energy and makes some problems for the reduction cells .For saving energy and preheating anode without energy, there is method which this article is to explain about. For this purpose applied a new method which in that, is measured the difference temperature between the anodes (new anode and anode butts) by thermovison (IR-Thermometer) at all levels of anode In 3 stages and compare their temperatures
کلمات کلیدی: Preheating anode , saving energy, Aluminum reduction cells, fluctuations of pot setting anodes
صفحه اختصاصی مقاله و دریافت فایل کامل: https://civilica.com/doc/690231/