The Research and Application of Calcination Technology for theVertical Shaft Furnace
Publish place: 4th Iran Aluminum International Conference IIAC2016
Publish Year: 1395
نوع سند: مقاله کنفرانسی
زبان: English
View: 277
متن کامل این Paper منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل Paper (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
IIAC04_114
تاریخ نمایه سازی: 22 دی 1396
Abstract:
The calcination technology for the vertical shaft furnace was developed and applied in plant successfully to adapt the change market. The new construction was designed by simulation optimizing; the special new brick for resisting sulfur corrosion was invented, and its capacity of resisting sulfur is three times than the common brick; the manual operation was replaced by automatic combustion control system, which make it come sure that the vertical shaft furnace is operated automatically. The residual heat utilization can achieve 1.2 ton steam per ton CPC or generate220-260kWh per ton CPC, which is 1.5 times than the average level in whole industry. The efficiency of desulfurizing is above 95%, and the efficiency of dedust is more than 85%. The comprehensive technology is widely applied, and proved that it is friendly to environment and highly automatic, and is the first choice for production quality, investment and operation.
Keywords:
vertical shaft furnace , simulation optimization , CPC quality control technology , automatic control system , resisting sulfur corrosion new brick
Authors
Zhou Shanhong
Shenyang Aluminum and Magnesium Engineering & Research Institute Co., Ltd, Shenyang, ۱۱۰۰۰۱, China
Zhou Dongfang
Shenyang Aluminum and Magnesium Engineering & Research Institute Co., Ltd, Shenyang, ۱۱۰۰۰۱, China