Antenna Design Using PBG Technology for Micro Electronic Applications
Publish place: Fifth International Conference on Electrical and Computer Engineering with Emphasis on Indigenous Knowledge
Publish Year: 1396
نوع سند: مقاله کنفرانسی
زبان: English
View: 555
This Paper With 7 Page And PDF Format Ready To Download
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
COMCONF05_310
تاریخ نمایه سازی: 21 اردیبهشت 1397
Abstract:
In this paper, the design of a macro strip patch antenna with a photonic crystal structure has been studied. The purpose of this study is to create a PGB structure that can be used to design macro strip antennas. With this method, you can increase the bandwidth several times and increase the antenna s gain. The noise and radiation loss of the antenna will also be significantly reduced by the use of PGB technology. The bandwidth is 0.6GHz-1.6THz. At 1.4THz frequency, it is 7.703dB. This antenna is widely used in high frequency microwave transmitter and microwave receiver systems. This research is simulated using the CST Microwave Studio software
Keywords:
Authors
Arash omidi
Department of Engineering, Isfahan University of technology, Isfahan, Iran
hamed moradi
APM Group International Inc, Kermanshah, Iran
Parisa Sadat Emadi
Department of Engineering, Isfahan University of technology, Isfahan, Iran
Eiman Pouradad
Department of Electronics. Engineering Collage No. ۲, Kermanshah, Iran