CIVILICA We Respect the Science
(ناشر تخصصی کنفرانسهای کشور / شماره مجوز انتشارات از وزارت فرهنگ و ارشاد اسلامی: ۸۹۷۱)

Case study of the statistical distribution of the concretes implemented at Qazvin

عنوان مقاله: Case study of the statistical distribution of the concretes implemented at Qazvin
شناسه ملی مقاله: JR_QSEJ-7-2_004
منتشر شده در شماره 2 دوره 7 فصل Summer در سال 1396
مشخصات نویسندگان مقاله:

Ali Ebrahimi - Student of MSc, Faculty of Civil and Surveying, Qazvin Branch, Islamic Azad University, Qazvin, Iran.
Mahdi Mahdikhani - Assistance Professor, Faculty of Civil Engineering, Imam Khomeini International University, Qazvin, Iran.

خلاصه مقاله:
Characteristics of produced concrete become changed through changing the characteristics of materials constituting the concrete. These changes include the quality of cement, the real ration of water to cement: with neglecting the further water within the aggregates or lack of that, the considered ratio fluctuates and the characteristics of the aggregate which are related to the following dimensions: quality of aggregate, the shape of aggregate and aggregate grading. The calculated strength of the mix design is the mean target strength which is marginally further than the specified strength. This further margin lowers the ration of water to cement in calculations and consequently, for a stable flow, the amount of consumption or alloy of cement in concrete increases. On the other hand, the amount of the margin depends on the following factors: The sensitivity level of the concrete project (with K coefficient) and standard deviation of concrete production. The purpose of defining this laboratory project is to obtain an optimal concrete mix design for different consumptions and consequently comparison of theoretical and workshop results in the mix design, lowering the cement consumption and the costs of concrete productions in batching and increasing or stabling the specified strength of concrete through lowering the level of cement consumed in concrete. In this procedure, concrete is produced through a common method that is segregating sand from cement to compare that with the results obtained and to calculate standard deviation fall, strength margin and cement alloy fall in order to produce concrete which is statistically suitable for the required strength.

کلمات کلیدی:
Standard Deviation, Specified Strength, Target Strength, Strength Margin, project Sensitivity Coefficient

صفحه اختصاصی مقاله و دریافت فایل کامل: https://civilica.com/doc/753011/