RoShanak Rezaei Kalantari - Department of Environmental Health Engineering, Iran University of Medical Sciences, Tehran, Iran
Ahmad Reza Yari - Research Center for Environmental Pollutants, Qom University of Medical Sciences, Qom, Iran
Ehsan Ahmadi - Department of Environmental Health Engineering, Tehran University of Medical Sciences, Tehran, Iran
Ali Azari - Department of Environmental Health Engineering, Tehran University of Medical Sciences, Tehran, Iran- Student’s Scientific Research Center, Tehran University of Medical Sciences, Tehran, Iran

Background & Aims of the Study: Corrosion and scaling are the most common problemsof water facilities. Corrosion imposes many financial and health loss on system andconsumer respectively, scaling also causes clogging and head loss in network. The purposeof this study is to determine the corrosion and scaling potential of water supply sources ofQom villages.Materials & Methods This cross-sectional study was done in 12 months (from 2011-2012). 100 samples were collected to determine pH, total dissolved solids (TDS),temperature, alkalinity, Calcium hardness and residual chlorine, and water corrosion andscaling have been studied by using Langelier, Ryzner, aggressive and Puckorius indexes.Results: The results illustrate that Qom village water according to the Langelier indexequals 1.62 (±0.11), according to Rayzner index equals 10.5 (±0.17), based on Aggressiveindex equals 12.035 (±0.14) and based on Pokurious index equals 9.92 (±0.13) respectively.Comparison of four index’s were showed that Water conditions in all villages of Qom is incorrosive range.Conclusions: According to this study, water supply in Qom village is corrosive, one of theeffective ways for solves this problem is pH adjustment by lime.

Qom villageCorrosion and scalingPotentialStability indexQuality and quantityanalyze