Numerical Study of the Flow Fields in Downburst with Consideration of the Rough Condition on the Ground

Publish Year: 1397
نوع سند: مقاله ژورنالی
زبان: English
View: 300

This Paper With 10 Page And PDF Format Ready To Download

  • Certificate
  • من نویسنده این مقاله هستم

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این Paper:

شناسه ملی سند علمی:

JR_CEJ-4-8_004

تاریخ نمایه سازی: 6 آذر 1397

Abstract:

The downburst is an extreme weather condition whose resulting load will affect the stability of the building structures. The characteristic of downbursts is required during the design of buildings. In order to achieve the characteristics of the downbursts, large eddy simulation (LES) is adopted. The method impinging jet is used to reproduce the downbursts, meanwhile smooth and rough ground conditions are examined. The setting of the rough layer of the ground is done by using the immersion boundary method (IBM). After the simulation, the wind field is decomposed into the mean component and the turbulence component. In this paper, the radial wind speed profile and the wind speed time diagram of the simulation experiment are compared with the previous measured data and the simulation results. This paper reveals that the radial wind speed is the key part of the downburst wind speed, and it rapidly increases with height. It is also found that the rough ground will cause the peak radial velocity to move up, which is consistent with the change of the main annular vorticity in vortex cloud image analysis. Finally, the turbulence intensity is found to be relatively small at the position where the radial wind speed is relatively large.

Authors

Xiaoyu Luo

Electric Power Research Institute of Guangdong Power Grid Co., Ltd., Guangzhou, Guangdong, China

Chong Zhang

School of Civil Engineering and Mechanic , Huazhong University of Science and Technology , Wuhan, China

Shishu Xiong

School of Civil Engineering and Mechanic , Huazhong University of Science and Technology , Wuhan, China

Zhenqing Liu

School of Civil Engineering and Mechanic , Huazhong University of Science and Technology , Wuhan, China