Study of Ni ion biosorption process from the mineral wastewaters using Aspergillus. niger on the alginate bed with the fixed bed reactor performance

Publish Year: 1388
نوع سند: مقاله کنفرانسی
زبان: English
View: 1,517

This Paper With 7 Page And PDF Format Ready To Download

  • Certificate
  • من نویسنده این مقاله هستم

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این Paper:

شناسه ملی سند علمی:

ICWR01_153

تاریخ نمایه سازی: 15 آذر 1388

Abstract:

Ni containing wastewaters are among the most important sources which transfer heavy metal contaminants to the environment; therefore mixing the Ni containing wastewater with human wastewater especially in high concentrations is an unmethodical action. Biological methods, particularly biosorption, are of high desirability with respect to economics and performance compared to physical-chemical methods (ion exchange, reverse osmosis…).In the present work, real wastewater sample from one of the industrial units was studied and the biosorption of Ni ion was performed through Aspergillus.niger microorganism dead bulk with batch and fixed bed process.First the absorption process was studied under floating flask (batch) condition and in the pH range of 6-9 and concentrations between 0.5-1.5 g/100mole, and then pH parameter and gram of absorbent were optimized to 8 and 1, respectively. The absorption rate obtained from this process is equal to 60% the results were adjusted to Longmuir and Frendlish absorption models and it was found that the results follow Longmuir absorption model. Then the Ni containing wastewater was studied in the fixed bed process. In this study in order to easy usage, fungous biomass powder was stabilized in the polymeric matrix and converted into granules. pH of wastewater is equal to the optimized pH obtained from the batch process. Use of fixed bed reactor is very convenient for the experiments and it works with stream like flow. The amount of volume occupied by granules is 147.2 ml and amount of biomass is about 16 g.The rate of absorption resulted from the fixed bed process is equal to 75.19% with inlet velocity of 4 ml/min , and this value is approximately two times greater than the amount of absorption obtained from batch process. Then the results were studied and adjusted Yun absorption model. Based on the resulted plot model, the breakthrough of the plot is at 60 min.

Authors

Marjan Emami

Islamic Azad University, Tehran North Branch, Member of young research club, Iran.

Reza Marandi

Islamic Azad University, Tehran North Branch, Iran

مراجع و منابع این Paper:

لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :
  • Chandra Sekher.K, et al, (1998), Removal of metal ions using ...
  • Eaton, D.A. , AWWA , Cbair, Clesceri, S .L. (WEF) ...
  • Fourest. E and Rou. J.C, (1992), Heavy metal Biosorption by ...
  • Kapoor.A and T .Viraraghavan 1997. Biosorption of heavy metals _ ...
  • Khambhaty .Y.et al., 2008, Kinetics, Equilibrium and thermo dynamic studies ...
  • Mungasavalli. D.P, et al, (2007), Biosorption of aqueous solution by ...
  • Pavia.d.L, et al, 1979, Introduction to spectroscopy: a guide for ...
  • Tunali.S. et al, 2005, Chromium (VI) biosorption characteristics of Neurospora ...
  • Vij ayaraghavan .K, (2005), Treatment of nickel containing electroplating effluents ...
  • نمایش کامل مراجع